Publicité
– do not use in case of intolerance of one of the materials used
– no re-use. This medical aid is intended for treating one patient only
– whilst wearing the support, please neither use any creams nor ointments on or
around it as they can destroy the material
Fitting instructions
1
Fold the grip top outwards, grasp the upper edge of the support.
2
It's best to put the aid on when sitting. Slip the support over the forward
section of the foot and then pull it up to the knee.
3
Position the support on the knee joint so that the kneecap (patella) is
supported at the side by the integrated silicone half-ring.
4
In the next step, remove the upper Velcro surface restraint and re-attach it
with Velcro in the direction of the inside leg under slight tension. Then attach
the lower restraint in the direction of the leg under slight tension.
5
Then, flap the grip top back towards the leg so that the silicone nodules are
directly on the skin.
Removal
6
To remove the support, please fold the grip top outwards
7
Then, remove the correction constraint, grasp the lower edge of the support
at the side on the splints and pull it downwards over the foot. Close the Velcro
fastener in order to avoid damaging other items, e.g. to further clothing.
EN
09
Publicité
