SOLIS PERFECT BLENDER SLIM Mode D'emploi page 77

54. Never use the blender without food or liquids in the blender
jug / blender container.
55. Never pour carbonated liquids into the blender jug / blender
container, this could cause injuries.
56. Do not process very hot or boiling liquids. They always have
to be allowed to cool down before being poured into the
blender jug / blender container.
57. Always be very careful when pouring warm liquids into the
blender jug / blender container, the liquid might splash out of
the jug / container and burn you!
58. When blending very warm liquids, always make sure that the
measuring cup is not placed in the lid to allow the steam to
escape. In this case, the blender jug should not be more than
half-full. Never look into the blender jug from above when
processing warm or even hot foods while the measuring cup
is not in place. Hot splashes could injure you!
Caution: Very hot liquids must never be filled into the blender
container.
59. Do not expose the blender jug / blender container to extreme
temperatures, e.g. do not place the cold blender jug in hot
water or vice versa.
60. Always note the Max-marking on the blender jug / the
blender container and make sure to never exceed it. Should
the Max-marking not be respected, the contents of the jug
could spill out of the lid. In this case, switch the appliance
off, disconnect the power plug and empty the jug enough
to bring the surface level of the jug contents back under the
Max-marking. Then, clean and dry the outside of the jug and
the motor base. Place the jug with the closed lid back on the
motor base and restart the appliance.
GB
77