Publicité
User manual
Menu access 3/5
Menu
2nd Menu
Scene Select
Scene time
Control Mode
1.X
-----
-----
4.SCENE
N.function
Pan Invert
Tilt Invert
P/T Rectify
Pan Offset
Tilt Offset
5.ADVA
Data hold
Scene time
Reset
Factory setting
3rd menu
1 - 10
Set the play duration of the current scene in automatic mode,
0
1 - 255
ON
OFF
0 - 255
0 - 255
0 - 255
0 - 255
Define the direction of pan rotation
off
on
Define the direction of tilt rotation
off
on
Determines whether the lyre detects the pan/tilt offset and corrects it.
off
on
Define the position of the Pan zero point
Defining the position of the tilt zero point
Setting in the event of DMX fail
off
on
1 - 255
Sure
No
Sure
No
RACER CMY 350 - EN
Functions
Scene settings
10 setting formats
unit is 0.1 second.
Scene not played in auto mode
0..1 seconds to 25.5 seconds
Control mode ON
Control mode OFF
Set the data of each channel, the
display content and sequence are in one-
to-one correspondence with the channel
table of the fixture
Do not invert
Ne pas inverser
Do not correct the position after a shift
Automatic correction of the position in
the event of a step offset and recording
of the fault
4 - 150
4 - 150
If the DMX signal is lost, the motors
and light source return to the position
and state they were in when the reset
was carried out.
If DMX signal lost, save last DMX info
Duration of scene
Reset - Yes
Reset - No
Factory reset - Yes
Factory reset - No
Invert
Inverser
17
Publicité
