Outdoor Sensor; Clock Reception - Explore Scientific RPW3009 Mode D'emploi

GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon instal-
lation.
3. Reattach the battery door.

OUTDOOR SENSOR

he main unit can receive data from up to 3 outdoor
sensors.
1 Sensor is included with delivery.
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon ins-
tallation.
3. Select a channel, then press TX.
4. Reattach the battery door.
5. Place the sensor within 30 m (98 ft) of the main un-
it using the table stand or wall mount.
NOTE: Replace batteries when [
the display is dim.
AC/DC POWER ADAPTER
Only use a compatible AC/DC Power adapter (5V
1000mA). Plug the power cable to the power jack
and the power adapter to a suitable power outlet.
NOTE: We recommend to insert batteries as backup
power source.
CLOCK

CLOCK RECEPTION

1. Replace batteries
2. RCC receiving can work in both date mode and alarm
3. The receiving process duration is 7 minutes.
4. During receiving process, the RCC signal symbol
5. If the RCC receiving process is successful, a complet-
] displays, or when
6. RCC receiving will automatically start at 2:03, 3:03,
7. To stop RCC reception, press the [
8. If the device is still not receiving the signal, please
after the RF receiving is finished
or press [ ] button will initiate RCC receiving.
mode.
[
ed RCC symbol [
and the date and time will be set automatically. If it
fails within 7 minutes, RCC setting will quit automati-
cally. If that happens, press [
initiate RCC receiving.
4:03, 5:03 every night. Auto receiving function will
cease if it is successful.
proceed to set the time manually.
] will be shown in the display
] button to re-
] button.
EN
IT
DE
FR
ES
7