Télécharger Imprimer la page

BE Power Equipment BE12500T Manuel D'opérateur page 24

Publicité

The air filter can get dirty after prolonged use and needs to be cleaned or
replaced regularly. If frequently operating in dusty environments, maintenance
must be done more often.
1. Open the air filter cover.
Bolt type locking:
Remove screws to remove the
cover plate
Snap on locking:
Pull the clamps on the upper
and lower ends of the air filter
upwards and remove the air
filter cover.
2. Clean foam filter element with cleaning solvent and
allow it to air dry. Place a few drops of oil on the filter.
attention: the air filter is delicate. do not forcibly
twist the filter to prevent damage.
3. Put the foam air filter back into place.
tip: make sure that the surface of the filter is in close
contact with the intake. make sure there are no gaps
do not start the engine without the air filter in place.
4. Reinstall the cover for the air
cleaner.
FUEL FILTER CLEANING
1. Remove the fuel tank cap and fuel filter screen.
2. Clean the filter screen with gasoline.
3. Wipe the filter screen dry and place back into tank.
4. Reassemble the fuel tank cap.
24
AIR FILTER SERVICE

Publicité

loading