Publicité
SUPPORT FOOT INSTALLATION
1. Align the two holes on the
support foot with the two holes
on the bottom of the frame.
Place two bolts through the
support foot hole and the frame
hole.
2. Fasten the nut to the bolt,
tighten with a wrench.
Repeat the same process to
install the other support foot.
WHEEL INSTALLATION
1. Slide the wheel shaft through
the wheel and the circular
gasket. After, slide the wheel
through the hole on the frame.
2. Insert the R pin into the hole at the end of the wheel
shaft to prevent the wheel from coming off.
Repeat the same process to install the other support
foot.
HANDLE INSTALLATION
1. Place two washers into the
holes on the left and right sides
of the handle. Slide the bolt
through the holes on the handle
and through the holes
on the frame.
2. Fasten the nut to the bolt and tight with a wrench.
Repeat the same process to install the other handle.
10
ASSEMBLY
Publicité
