Publicité
Rear Panel
1
AUDIO OUT
Connect to the
Audio input jacks of your television.
2
COMPONENT VIDEO OUT
-
Use these jacks if you have a TV with
Component Video in jacks.
These jacks provide P
- If Progressive Scan (P-SCAN) is selected by
using the P.SCAN button on the front panel,
progressive scan video mode will be enabled.
- If Interlace Scan (I-SCAN) is selected by using
the P.SCAN button on the front panel, interlace
scan video mode will be enabled.
3. HDMI OUT JACK
- Use an HDMI cable to connect this jack to the
HDMI jack on your television for the best
quality picture.
- If an HDMI cable is connected to an
HDMIcompatible TV, HDMI will be output
automatically within 10 seconds.
- If you want to use a Video or Component
Output, unplug HDMI cable.
DVD/VCR Output Chart
Type of Connection
COMPONENT
VIDEO OUT
AUDIO OUT (L,R)
DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
LINE OUT (A/V)
RF OUT
HDMI OUT
Notes
Consult your
TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
■
supported, follow the TV User's Manual regarding Progressive Scan settings in the TV's menu system.
S
E T U P
, P
and Y video.
R
B
DVD Output Jacks
O
O
O
O
O
O
ˆ ˆ Ø Ø
¨ ¨
∏ ∏
4
DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
-
Use either an optical or coaxial digital audio
cable to connect to a compatible Dolby Digital
receiver.
- Use either an optical or coaxial digital audio
cable to connect to an A/V Amplifier that
contains a Dolby Digital, MPEG2 or DTS
decoder.
5
RF OUT (TO TV)
Connect your DVD-VCR to a
6
RF IN (FROM ANT.)
Connect the RF
7
LINE OUT (VIDEO/AUDIO)
Use a
Video/Audio cables to connect to the
Video/Audio input jacks on your television.
8
LINE IN 1 (VIDEO/AUDIO)
Connect to the
external device.
VCR Output Jacks
X
X
X
O
O
X
ENG-11
Œ Œ
´ ´
ˇ ˇ
" "
¨ ¨
TV
Antenna cable to your DVD-VCR.
Video/Audio output jack of your
O :
Active.
X : Inactive.
Publicité
