CDVI V1SR Mode D'emploi page 6

Armature Plate
- It is vital that the magnetic lock
and armature plate are securely
fixed to their supports.
- The magnetic lock and the
armature plate must be aligned.
- The armature plate must be
mounted "floating"
the central mounting screw to
compensate for any misalignment
of the door
- Use thread lock to hold the fixing
bolts in place (on armature plate
and mounting plate)
6
V1SR, V3SR, V3SRB, V4SR, V5SR, V5SRB
Internal surface electro-magnetic locks range
around
Safety Ropes
(fixed on maglock and door frame)
Throughout its life, an electro-
magnetic lock is subject to an
accumulation of repeated shocks
and stresses at the fixing points on
the door frame. Frequent opening
and closing of the door as well as
attempts at opening a locked door
or acts of vandalism can cause the
maglock to detach from its mounting
support or bracket. In order to
the risk of the maglock
two safety ropes can be installed to
reduce the risk of harm of users.
EN
avoid
falling, the