Publicité
USING THE COMMERCIAL BLENDER
Use the Flex Edge tamper accessory
as needed for optimal blending
performance. Remove the ingredient-
measuring cap only, and leave the
5
lid in place. Stir or press contents
down towards the blade. When you
are finished, replace the ingredient-
measuring cap in the blender jar lid
before resuming blending.
After blending, flip the START/STOP
toggle switch up or down. Allow the
7
Blender to come to a complete stop
before removing the lid and pouring
your blended ingredients.
8 | USING THE COMMERCIAL BLENDER
If desired, use the Pulse function for
a momentary boost of speed while
blending on the variable speed
settings.
6
Press and hold the PULSE toggle
switch up for a faster pulse, or down
for a slower pulse.
NOTE: The Pulse function may also
be used on its own as a separate
blending function while the Blender
is in standby mode.
If the Blender remains in standby
mode for 28 minutes with no
activity, the Blender will enter sleep
mode. To get out of sleep mode,
8
press the START/STOP switch once
to bring into standby mode. Then,
press START/STOP once more to
start the Blender.
Publicité
