Publicité
5. START UP INSTRUCTIONS
5.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
1.
Machine.
2.
Working levers
3.
Protection bars
4.
Tray
5.
Work table
6.
Wheel axle
7.
Wheels
8.
Spring clips
9.
Work lever pin
10. Pressure washer Ø16
11. M16 nut
12. Bolt M8x20
13. Spring washer Ø8
14. Pressure washer Ø8
15. M8 nut
Carefully remove all items from the box and ensure all
listed items are present. Inspect the product carefully
to ensure that there are no damaged items. If you find
any damaged part or missing element, do not use the
machine until the defect has been repaired or you
have all the parts that make up the machine. Using
the machine with defective parts or without all its
elements can cause severe personal injury.
Do not dispose of the machine's packaging until you
are sure that you have received all the parts and that
the machine is working properly. The packaging will
be necessary in case you have to return the machine.
5.2. MOUNTING
Attention! For your safety, do not connect the
machine to the mains until the machine is completely
assembled and you have read and understood all the
instructions in this manual.
5.2.1. WHEEL ASSEMBLY
1. Mount the wheels as shown in the figure. Use
pieces 6, 7, 10 and 11
10
11
37/120
English
6
10
7
Publicité
