Publicité
Tone Quality Adjustment/HEQ Setting
Q
SEL,
O
A,V,<,>, © SPC, © preset 1,©
preset 2 button
1. HEQ Switching
Equalizer modes change as follows each time
SEL is pressed.
Normal Mode (VOL)
-*■
HEQ
GEQ
-*
BAL/FAD
t
i
Preout - DRCQ - SBC/SBC-SW «- Position
2. Selecting Desired Tone Quality
Select a desired tone quality using A,V,<,>.
With the center fixed flat, any of the 49 equaliz¬
er patterns, arranged in vertical and horizontal
directions, can be selected.
3. Selecting Desired Sound Field Effect
Press SPC to select a desired sound field
effect.
1. Press 1 to narrow the sound field
(steps 1 to 3).
2. Press 2 to widen the sound field
(steps 1 to 3).
v
-
GEQ Setting
O SEL,© A,V,<,>
• Press SEL to select GEQ mode.
• Press>, < (frequency up/down) to select a
frequency.
• Press A to raise the level.
Press V to lower the level.
\___
y
^GEQ Memory
"
© SEL, © operation buttons , © SPACE ,©
preset 1, © prese 2, © preset 3,0 preset 4 ,
0 preset 5 , © preset 6
1. Select GEQ.
2. Select a desired equalizer characteristic.
3. Press one of the memory buttons for more
than 2 seconds.
4. The preset number flashes, indicating that the
selected equalizer characteristic has been
saved in the memory.
GEQ Memory Recall
O SEL, © operation buttons , © SPACE ,©
preset 1, © prese 2, © preset 3,0 preset 4 ,
© preset 5 , © preset 6
1. Press SEL to select GEQ.
2. Press one of the memory buttons.
I
CQ-VX777EUC
43
Publicité
