N
Opening/Closing the Front Panel
(Liftup)
Open and close the front panel when inserting or removing a
tape.
• When OPEN CLOSE is pressed, the front panel is lifted all the way
up.
If a tape is inside, it will be automatically ejected.
• When OPEN CLOSE is pressed again, the front panel is lowered all
the way down to the original position.
Note:
• After a tape is inserted when the front panel is up highest, the panel is automatically lowered all the
way down to the original position.
• When the front panel is up highest, all operation buttons will be disable except for OPEN CLOSE
and the remote control buttons.
• If no cassette tape is inserted or ejected for about 25 seconds while the front panel is up highest, the
panel is automatically lowered all the way down to the original position.
• If a CD or tape is not in the fully ejected position, loading or unloading will be accurately performed
because, otherwise, the CD, tape or the front panel could be damaged.
\
_
)
Note:
• The highest liftup position of the front panel can be set to either
of the two positions as shown at left.
• If there is no obstacle in the car, the front panel can be set to
position ©(FULLOPEN).
• The front panel is originally set to position © (HALF OPEN).
• See page 39 for how to set the front panel liftup position.
CQ-VX777EUC
19