Publicité
How to install the main unit
1.Tear off the camera lens protection film.
2.Adjust the device to ensure the lens is facing forward.
3.After confirming the position and direction, peel off the
protective film of 3M glue on the device, paste the
device on the electrostatic sticker and press hard to
make it stable on the windshield.
4.Use the power supply cable with car charger to connect
the power port of the device to car's cigarette lighter
socket.
Important Note: Depending on the vehicle, the
cigarette lighter socket may be located in a differ-
ent position. The figure provided is for reference
only.
How to install the monitor
1.Tear off the monitor protection film.
2.To guarantee a good line of sight, adjust the monitor as
necessary.
3.After confirming the position and direction, tear off the
protective film of 3M glue on the monitor, paste the
monitor on the central control panel (If the monitor is too
close to the windshield, it may cause reflection on the
windshield, which may affect the product functionality
under some specific driving scenes and affect your expe-
rience. Please choose to place it away from the front
windshield as far as possible.) and press hard to make it
stable.
4.Use the monitor cable to connect the power cable and
power port of the monitor.
Publicité
