Publicité
Installation Guide
The normal operation of the intelligent multi-function warning device depends on accurate and rigor-
ous installation. Before installing this product, please check the installation guide or video carefully to
avoid trouble caused by installation errors.
Search "Spedal" on YouTube or scan the QR code to see the installation video. It is easier to get start-
ed.
For optimal product functionality, please ensure the following installation conditions:
1.There is no visual obstruction in front of and around the camera (such as rear view mirror box cover or plating), and
the wiper can cover the area for cleaning.
2.Try to install as close to the center above the windshield as possible. Pay attention to the host base to reserve
enough space for the cable outlet.
3.The windshield at the installation position must be kept clean and dry.
Installing a Memory Card
Take out the device main unit and insert a TF card into the
card slot.
Paste the electrostatic sticker
Take out the electrostatic sticker in the packing box and peel off the release film, and paste it on the front glass in the
recommended host installation area. Please pay attention to the gap between the electrostatic sticker and the glass
when pasting.Air bubbles are squeezed clean.
Warm Tip: There may be a microwave window (i. e. black grid area) in the device installation area. Please
avoid that area because electrostatic sticker cannot be effectively pasted on non-smooth flat.
Publicité
