Publicité
OPERATING YOUR WINE & BEVERAGE COOLER
Control Panel
1. Light
Turn the inner light ON or OFF.
2. °F/°C Selector
Choose to display temperature setting in Fahrenheit or
3.
To view the set temperature at any time, please press the
flash in the LED display for 5 seconds.
4. Temperature display for the lower zone: the LED display will flash when setting the temperature. When not
setting the temperature (normal mode), this display will show the current temperature for the lower zone.
5. Celsius or Fahrenheit: these lights indicate if the temperature is being shown in Celsius or Fahrenheit.
6. Temperature display for the upper zone: the LED display will flash when setting the temperature. When not
setting the temperature (normal mode), this display will show the current temperature for the upper zone.
7. UP
Use this button to raise the temperature in 1 degree
8. DOWN
Use this button to lower the temperature in 1 degree
9. Power
Use
this button to turn the wine cooler ON or OFF. To power OFF the cooler, press POWER button or a
minimum of 5 seconds. Press the same button to power ON. The LED display will show the original
temperature set prior to resetting the appliance.
10. The
symbol refers to the lower zone.
11. The
symbol refers to the upper zone.
TEMPERATURE ZONES
The wine cooler has two temperature zones.
•
Upper Zone (40-56°F)
Lower Zone (54-65°F)
•
SETTING A TEMPERATURE
•
Choose between Celsius and Fahrenheit by pushing the
in
Celsius and Fahrenheit.
33 55 E n t e r p r i s e A v e n u e , S uit e 16 0, W e s t o n , Fl o r i d a 3 3 3 3 1
Celsius.
increments.
increments.
The recommended temperature setting for each zone is:
i n f o @ v i n o t e m p . c o m
button. The set temperature will temporarily
button.
The temperature will now display
11
Publicité
