Télécharger Imprimer la page

Lux Tools A-RM-2x20/43 Set Notice Originale page 33

Publicité

Risks caused by vibrations
CAUTION! Risk of injury due to 
vibrations! Vibrations may, in par-
ticular for persons with circulation
problems, cause damage to blood
vessels and/or nerves.
If you notice any of the following
symptoms, stop working immediately
and consult a doctor. Numbness of
body parts, loss of sense of feeling,
itching, pins and needles, pain,
changes in skin colour.
The vibration values specified in the technical
data represent the main uses of the device.
The actual existing vibrations during use may
deviate from these as a result of the following
factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by fol-
lowing the tips below:
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your hands
at the same time to promote circulation.
Electrical safety
• The device may only be connected to a
socket that is correctly installed and
grounded.
• The fuse must be a residual current cir-
cuit-breaker with a measured residual
current of no more than 30 mA.
• Make sure that the power supply corre-
sponds with the connection specifications
of the device before it is connected.
• The device may only be used within the
specified limitations for voltage and power
(see type plate).
• Do not touch the mains plug with wet
hands! Always pull out the mains plug at
the plug and not by the cable.
• Do not bend, crush, pull or drive over the
power cable, protect from sharp edges, oil
and heat.
• Do not lift the device using the cable or
use the cable for purposes other than
intended.
• Check the plug and cable before each
use.
• If the power cable is damaged immedi-
ately disconnect the plug. Never use the
device if the power cable is damaged.
• If the device is not in use make sure the
plug is pulled out.
• Make sure that the device is switched off
before plugging in the mains cable.
• Make sure that the device is switched off
before unplugging it.
• Disconnect the power supply before
transporting the device.
Handling rechargeable devices
• Danger of fire! Only use batteries
approved by the manufacturer. Only use
chargers approved by the manufacturer.
Keep battery away from metal objects that
could cause short circuiting when not in
use. There is a risk of injuries and fires.
• Prior to connecting the charger, verify that
the power supply connection corresponds
with the connecting data of the device.
• The fuse must be a residual current cir-
cuit-breaker with a measured residual
current of no more than 30 mA.
• Only charge the battery in closed rooms.
• Ensure that the device is switched off
before installing the battery.
• Never switch on the device during the
charging process.
• Fluid can escape from the battery when
used incorrectly. Battery fluid may result in
skin irritations and burns. Avoid contact!
In the event of accidental contact, rinse
thoroughly with water. Immediately seek
the aid of a physician in the event of eye
contact.
Maintenance
• Before conducting any maintenance on
the device, make sure the battery has
been removed.
• Before conducting any maintenance on
the device, disconnect the mains plug.
• Only those maintenance and fault elimi-
nation tasks described here may be car-
ried out. Any other tasks must be com-
pleted by a specialist.
• Only use original replacement parts. Only
these replacement parts are designed
and suitable for the device. Other replace-
ment parts will not only lead to an invalida-
tion of the warranty, they may also endan-
ger you and your environment.
GB
33

Publicité

loading

Ce manuel est également adapté pour:

196061