Publicité
Operating the Main Menu (Cont.)
Changing Channels
Remote control unit
OPERATE
COMPUTER VIDEO
T
VOL.
ZOOM
FOCUS
W
MENU/ENTER
PAGE
BACK
PRESET
QUICK
AV
ALIGN.
MUTING
PAGE BACK button
54
MENU/ENTER
button
Cursor buttons
You can change channels where lines and sources have been set
up. The channels can be switched by using either a "direct channel"
or the "Channel setup/selection" menu.
To change channels using a "Direct Channel" :
1
Press the PAGE BACK when no menu
is displayed.
• The channel number is shown on the upper part of the screen.
• A channel number which has a line and source registered is
displayed. (If no channel that has such registration is available,
AUTO will be displayed.)
(Direct Channel switching menu)
2
Select the Channel number with the
cursor button 5 or ∞ .
• Numbers that you can choose from are numbers from 1 to 10
and AUTO.
• Pressing the cursor ∞ makes the number smaller.
• Pressing the cursor 5 makes the number larger.
• If you press PAGE BACK, the selection will be canceled.
3
Press the MENU/ENTER button to set
(fix).
• The display switches automatically to the line and source that
are set for the channel.
Line
Y / C
• If you select AUTO and press MENU/ENTER to set, the source
will be set up in "AUTO" mode.
Memo
• When AUTO is selected, all sources will become candidates to be
displayed.
• When a channel is selected, the source registered to the selected channel
is to be displayed.
C H :
1
Channel
C H :
1
N T S C ( 4 8 0 i )
Source
Publicité
