Publicité
English
Before using the device, review and download the latest Quick Start
Guide at https://consumer.huawei.com/en/support/.
Getting Started
1. Connect the power adapter to the router, then connect the WAN port
of the router to the LAN port of the optical/broadband modem or a wall-
mounted network port using a network cable.
2. Connect your mobile phone or computer to the router's Wi-Fi
network (no password required). Check for the Wi-Fi name on the
bottom of the router.
3. Open the browser, then enter 192.168.3.1 in the address bar. Follow
the instructions to set up your router.
Indicator
Steady green
Steady red
Flashing
How do I connect an add-on HUAWEI router (with H/Hi
button) to my HUAWEI WiFi WS5200's network?
You can connect the router in either of the following ways:
• Wired connection. Connect the WAN port of the add-on router (new
or restored to factory settings) to the LAN port of the configured
HUAWEI WiFi WS5200 using an Ethernet cable.
• Wireless connection (using the H button).
Step 1: Place the add-on router (new or restored to factory settings)
within one meter of the configured HUAWEI WiFi WS5200 and
connect it to the power supply.
Step 2: When the indicator on the HUAWEI WiFi WS5200 starts to
flash, press the H button on it. Wait until the indicator on the add-on
router shows it is connected to the network.
The following HUAWEI device models are supported: WS5800 /
WS7100 / WS7200 / WS5200 V3. For details about more device
models, see the device manual.
Français
Avant toute utilisation de l'appareil, veuillez prendre connaissance du
Guide de démarrage rapide le plus récent, que vous pouvez
télécharger depuis https://consumer.huawei.com/fr/support/.
Prise en main
1. Connectez l'adaptateur secteur sur le routeur, puis, à l'aide d'un
câble réseau, connectez le port WAN du routeur sur le port LAN du
modem optique/large bande ou sur un port réseau mural.
Connected to the network
Not connected to the network
The router has detected a pairable device
1
Publicité
