Publicité
Handling and operation
Establishing a connection to a smartphone
Before you can use the selfie stick, you must first pair the remote
with a compatible smartphone via Bluetooth
release
NOTE
►
This product supports the operating systems iOS 8.0
or higher and Android 6.0 or higher. As Android is an
open-source system, each manufacturer determines the
key assignment of its camera app themselves. On some
smartphones no image can be triggered with the original
camera app, and there may be various malfunctions when
pressing the
of the operating system to see whether the settings offer an
option for setting the volume control (+) as an additional
trigger button.
♦
Press and hold the
switch on the remote release . The operating LED
up red once and then flashes blue every second. The remote
release
1 minute. If you do not make the pairing within 1 minute,
the remote release
Activate the Bluetooth
♦
search for Bluetooth
description of how to do this in the operating instructions for
your smartphone.
♦
Select the entry SSBS 3.0 A1 from the list of found devices
on your smartphone to pair the two devices. If the connec-
tion is successful, the operating LED
♦
To switch off the remote release , press and hold the
button
flashes red three times before going out completely.
SSBS 3.0 A1
button . In this case, check the settings
button
is now in pairing mode for approx.
switches off automatically.
®
for approx. 3 seconds. The operating LED
for about 3 seconds to
®
function on your smartphone and
devices. You can find a detailed
goes out.
GB │ IE
│
®
.
lights
briefly
27
■
Publicité
