Publicité
Precautions for installation work
Safety precautions for installation work
•
Take safety against falling objects or personnel.
•
Make sure to turn off the power of the product and of any devices, such as a center module,
before connection to the product. Failure to observe this may cause electric shock.
•
Ascertain that other safety controls are implemented as well to ensure that the work is carried
out safely and reliably.
•
Do not install the product using mounting fixtures that were deformed due to damage suffered
during transport or installation, or on a damaged outer wall. This could cause the product to
fall.
Tightening of screws and bolts
•
Tighten screws and bolts to the specified torque. Do not overtighten screws and bolts.
Overtightening will damage the thread and cause the product to fall. If the torque is too low, on
the other hand, screws and bolts will be loose.
•
Use a torque driver or torque wrench to maintain the specified torque.
•
The range of use of torque drivers and torque wrenches is limited. Choose a torque driver or
torque wrench suitable for the recommended torque value.
•
Do not use impact drivers or powered screwdrivers as these may damage the screws or bolts.
•
When tightening a screw or bolt, make it at a right angle to the surface. After tightening the
screws or bolts, check visually for looseness.
Preface
•
This product is the Speaker Microphone designed for the exclusive order posts to be used in
combination with the Panasonic Wireless Communication System. The product can be used as
a speaker or microphone.
•
While the slim and small-sized shape is compatible with the installation on most of the order
posts, the product has accomplished the clear sound which can achieve the communication
even under the engine noise.
•
The provided brackets and urethane foams help the flexible mounting and speedy installation.
All manuals and user guides at all-guides.com
9
Publicité
