Publicité
•
Expose the sound apertures of the Speaker Microphone from the opening of the order post.
When covering the opening with a mesh net or punching metal sheet, select the one with
relatively high aperture ratio.
•
Stick the Speaker Microphone with the front side of the order post without gap.
•
Isolate the sound in the order post with fit-sized panels so that the sound from the unit for
the speaker does not leak into the area around the unit for the microphone.
Microphone
Space
Speaker
Notice to avoid breakdown
•
Take measures to prevent water splash on the input cable and the connection section of the
wireless communication system.
•
Do not install the unit inclining upward to prevent standing water on the unit.
Others
•
Do not install near the equipment or substance which are affected by magnetic field.
All manuals and user guides at all-guides.com
Sound
leakage
Stick each unit with
the front side of the
order post without
gap
MAX 12mm
Space
Bad example
MAX 12mm
Fit-sized panel without
openings
MAX 12mm
Good example
13
Publicité
