Black & Decker WW100 Mode D'emploi page 6

ENGLISH
Battery diagnostics
If the appliance detects a weak battery,
the charging indicator will flash at a fast
rate when the power button is activated
Proceed as follows.
• Plug in the charger. Switch on at the
mains.
• Leave the appliance to charge.
• If the appliance detects a damaged
battery, the charging ndicator will flash
at a fast rate when the appliance is on
charge. Proceed as follows.
• Take the appliance and the charger
to be tested at an authorised services
centre.
Note: It may take as long as 60 minutes to
determine that the battery is defective. If
the battery is too hot or too cold, the LED
will alternately blink, fast and slow, one
flash at each speed and repeat.
6
All manuals and user guides at all-guides.com
(Original instructions)