Publicité
CO 4031
10 O-RING JOINT PACK 4,4x1,78mm
WARNING
IMPORTANT
• Always follow the instructions provided by the vehicle manufaturer.
• For use by trained personnel only.
• To maintain an acceptable noise level, do not exceed 8 bar pressure.
• The tool is designed to be used with 5-8 bar pressure.
USE
1. Choose an adapter suitable for working on the brake
caliper pistion. Fit it onto magnetic.
2. Press the release button and operate lever to move the
push spindle forward.
3. Press button and rotating lever to rotate the brake
caliper piston. (Fig.2)
4. After pushing the piston backward, press button and pull lever to move the push
spindle backward, releasing the tool from the caliper. (Fig.3)
Publicité
