Publicité
socket. Connect the measuring leads to the test
object and read the results from the display. The
direction of current will be indicated by the prefixed
symbol.
Measuring range
600 μA
6000 μA
60 mA
600 mA
10 A
• In the 10 A range, observe the maximum switch-
on duration!
Alternating current measurement/A~
Use the selection switch to set a suitable range. Use
the [SEL]button and select [AC]. Connect the black
measuring lead to the [COM] socket and the red
Measuring range
Resolution
600 μA
0.1 μA
6000 μA
1 μA
60 mA
10 mA
600 mA
100 μA
10 A
10 mA
• Frequency range: 10 Hz – 1.2 kHz
Measuring range
600 Ω
6 KΩ
60 KΩ
600 KΩ
6 MΩ
60 MΩ
• Overvoltage protection: 250 V RMS
• Idle voltage: 1.2 V
Diode test
Set the selection switch to [
the [SEL] button 2×. Connect the black measuring
lead to the [COM] socket and the red measuring lead
Measuring range
• Overvoltage protection: 250 V RMS idle voltage:
3.2 V
Continuity test
Use the selection switch to set to [
the [SEL] button. Connect the black measuring lead
to the [COM] socket and the red measuring lead to
the [V/Ω] socket. Connect the measuring leads to the
test circuit.
Resolution
0.1 μA
1 μA
10 mA
100 μA
10 mA
Resolution
0.1 Ω
1 Ω
10 Ω
100 Ω
1 KΩ
10 KΩ
/
]. Press
Resolution
1 mV
/
]. Press
Note: With a current in excess of 600 mA,
the measurement must be carried out using
the [10 A] socket!
Overvoltage protection Accuracy
600mA/250V automatic
resetting fuse.
10A/1000V
measuring lead to the [mA], or [10 A] socket. Con-
nect the measuring leads to the test object and read
the results from the display.
Note: With a current in excess of 600 mA,
the measurement must be carried out using
the [10 A] socket!
Overvoltage protec-
tion
600mA/250V automat-
ic resetting fuse.
10A/1000V
Resistance measurement/Ω
Use the selection switch to set a suitable range. Con-
nect the black measuring lead to the [COM] socket
and the red measuring lead to the [V/Ω] socket. Con-
nect the measuring leads to the test object and read
the results from the display.
Accuracy
±1.2% + 5 digits
± 2,0%
+ 10 digits
to the [V/Ω] socket. Connect the measuring leads to
the test object (red measuring lead = anode, black
measuring lead = cathode). The forward voltage is
displayed.
±1.2% of measuring range + 3 dig-
its
±2,0% of measuring range + 10
digits
Accuracy
±1,5% of measuring range + 3 digits
±3,0% of measuring range + 10 digits
Display
Forward voltage
GB
29
Publicité
