Publicité
Brush Roller
Press the Clean Water Tank release button to
remove it from the appliance.
Use the cleaning tool to remove hair and
debris wrapped around the roller and
rinse the roller and back of the CWT with
water. Allow them to dry completely before
reinstalling.
Replace the brush roller by inserting its end
into the left side of the holder, then attach the
roller tab to the magnetic buckle on the right
side to lock into place.
Remove the brush roller by grabbing the
brush roller tab and pulling out.
Remove hair and debris from the brush roller
chamber and the opening with the cleaning
tool.
Place the tank back into the appliance. You
should hear a click if done correctly.
21
Publicité
