Publicité
Dirty Water Tank
• When dirty water reaches the Max line, the appliance will stop working and show a reminder on
the display and play a voice prompt.
• Pull up the tank lid to empty the DWT. Use the cleaning tool to remove remaining debris. Rinse
the inside of the DWT and place back into the appliance.
Dry Filter & DWT Lid
• Grasp recessed area on each side of the dry filter and pull upward. Rinse under running water and
must be completely dry before recombining with the lid of the DWT.
* A spare dry filter is provided with your appliance for convenient replacement.
Brush Roller Self-cleaning
1. Place the appliance on the charging dock after use, the sensor will
auto-detect the level of dirt.
2. When you hear the voice prompt "Please start self-cleaning", press
the self-cleaning button and begin the process.
3. Once completed, you will hear the voice prompt "Self-cleaning
completed, please clean the Dirty Water Tank." At this point, the
appliance will begin charging.
Note:
• Ensure the charging dock is plugged in and the battery level>25%.
• Before self-cleaning cycle, please clean the DWT and ensure the
water level in the CWT>40%.
• During the drying process, if you press the self-cleaning button, the
drying process will be interrupted. You can press it again to restart
self-cleaning.
20
Publicité
