Publicité
Using Lock function as Key Lock
1. Short press the Lock key
" "
Lock key
will be lighted up with full intensity.
2.
Short press the Lock key" " again to deactivate the Key Lock function.The
• If there is a power cut, this function is not active when user switches on the hob again.
Using Lock function as Child Lock
1. Make sure that all cooking zone are switched OFF and no timer is running.
2.
Touch the Lock key" " for 3 seconds.The control panel will only keep LEDs
C•.•=• ·
LED timer ",-, ,-, " will show "Loc ".
3. Touch the Lock key" " for 3 seconds again to deactivate the Child Lock
function.The Lock key" " disappear after 30s and the panel shows on/off in
pulsating.
Special functions
Over-Temperature Protection
A temperature sensor is monitoring the temperature inside the induction hob. When
an excessive temperature is detected, the induction hob will stop operation
automatically.
Detection of Small Articles
When undersized or non-magnetic cookware (e.g. aluminium), or some other
small items (e.g. knife, fork, key) has been left on the hob, the hob will
automatically go to standby mode in 1 minute. The fan will keep cooling down the
induction hob for a further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function. It shuts down the cooking
zone automatically if you ever forget to turn it off. The default maximum working
time for each power level is shown in the table below:
Power level
Default working timer (minutes)
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switch off after 30 seconds.
" "
only when the hob is on and working. The LED of
will be lighted up with half intensity.
and ON/OFF button" " lighted up with full intensity, and
I
1~3
I
360
I
I
4~6
7~8
I
I
180
120
33
9
Warming
function
360
90
Publicité
