Publicité
3 Installation
2. Connection of pressure relief valve with the
heater on the inlet of the water heater.
3. In order to avoid leakage when connecting the
pipelines, the rubber seal gaskets provided with
the heater must be added at the end of the
threads to ensure leak proof joints (see Fig.4).
Rubber seal gaskets
Hot water outlet
Adjusting handle for
mixing valve
4. If the users want to realize a multi-way supply
system, refer to the method shown in fig.5 for
connection of the pipelines.
Triple joint
Hot water
outlet
Water pool
Electric Storage Water Heater / User Manual
Cold water inlet
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Hot water
Power cord
Cold water
inlet
Mixing valve
(Fig.5)
Power cord
Rubber seal gaskets
(Fig.4)
Pressure relief valve
Water inlet valve
Shower nozzle
Water inlet valve
Running water pipe
11 / EN
Publicité
