Publicité
Safety instructions
Component list
Intended use
Operating instructions
Maintenance
Environmental protection
Troubleshooting
Technical data
Declaration of conformity
PRODUCT SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
CONTENTS
CONTENTS
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
d) Do not abuse the cord. Never use the cord for carrying,
e) When operating a power tool outdoors, use an
f) If operating a power tool in a damp location is
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common
b) Use personal protective equipment. Always wear eye
c) Prevent unintentional starting. Ensure the switch is
d) Remove any adjusting key or wrench before turning
of electric shock.
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock .
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock .
unavoidable, use a residual current device (RCD)
protected supply . Use of an RCD reduces the risk of
electric shock.
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in serious
personal injury.
protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents .
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
7
10
10
11
12
13
13
14
15
EN
7
Publicité
