Publicité
Sandpaper overview
Only use sandpaper with a diameter of 225 mm (this drywall sander requires a diameter of 225
mm). Suitable sanding discs are available in various grit sizes.
Coarse
Sanding discs Ø 225
P80
P100
5.1 FITTING & REPLACING THE SANDING PAD
• If the sanding pad is damaged during use, it must be replaced with an identical replacement
pad.
• Remove the sandpaper sanding disc. Use the supplied Allen key to turn the locking screw in the
centre of the sanding pad anti-clockwise until the screw is released and the damaged sanding
pad can be removed.
6.0 OPERATION
• Press the power switch to turn on the appliance.
• To avoid having to press the power switch continuously, you can press the lock button on the
side while the power switch is pressed to activate the locking function. The appliance will now
continue to work without you having to keep the power switch pressed.
• Press the lock button again to switch the appliance off again. Use the speed controller to set
the required speed (thumbwheel on the side).
Speed
controller
P120
P150
Hexagon socket fixing screw
Locking
knob
18
Fine
P180
P240
Actuating
switch
www.DEUBAXXL.de
Publicité
