Publicité
5.0 ASSEMBLY
Folding connection assembly and dismantling
Step 1:
Connection set for suction adapter / connecting the dust bag
Telescopic
handle
Now connect the end to the dust bag and secure it in place.
How to attach the sandpaper:
Note: Make absolutely sure that the appliance is switched off and the power supply is disconnected
before attaching or removing the sandpaper.
• Place the appliance on a smooth surface before you start. Attach one of the supplied sanding
discs to the sanding pad. The back of the sanding disc attaches to the sanding pad via velcro.
• To optimise sanding performance, it is necessary to change the sandpaper after a certain
amount of use. First, switch off the appliance and unplug it. Then remove the entire worn
sanding disc from the sanding pad so that a new sanding disc can be neatly attached. Now
lightly press down the new sanding disc to secure it in place.
• Important information: The sandpaper sanding discs must have a diameter of 225 mm so that
the inner circle of holes in the sanding disc (consisting of 10 individual holes of the same
diameter) matches the inner circle of holes in the sanding pad. This is essential as the dust
generated during sanding is extracted via these holes. If they do not match, the dust can't be
sucked away.
Step 2:
Lock
Connection adapter
17
Step 3:
Suction hose
Bayonet catch
www.DEUBAXXL.de
Publicité
