Publicité
To maintain the performance of the towel warmer, it is necessary
to remove the dust about once a month.
The structure of the heater can be cleaned with a damp cloth,
but never use abrasive products.
TROUBLESHOOTING & TECHNICAL SPECIFICATIONS
Always disconnect the unit from the power supply and allow it to
cool before performing any maintenance
- TECHNICAL CHARACTERISTICS
Model / Ref
Nominal voltage 230 V ~
Rated frequency 50 Hz
Rated power
Protection class II
Protection IP
Pilot wire
- IN CASE OF PROBLEMS
Problem
The unit does not
heat up
The unit heats up
continuously
MAINTENANCE INSTRUCTIONS
BAT-HJEE
500 W
IP24
6 orders
Solution
Check that the circuit breakers of the installation are
switched on, or that the load breaker has not cut off the
power supply (if the installation has one).
Select the COMFORT mode.
Increase the temperature setting.
Make sure the unit is not in a draft.
Decrease the temperature setting.
BAT-HJ8EE
230 V ~
50 Hz
750 W
II
IP24
6 orders
31
Publicité
