Publicité
M
x1
N
SEAT BOTTOM
PRODUCT ASSEMBLY
Insert the front bumper into the car.
Put the gasket, front wheel, gasket and nut into the front axle in turn.
Fix the nut with the M10 wrench, and then attach the wheel cover to
the wheel.
Place the gear box rear wheel, gasket, and nut on the rear axle in
turn.
Fix the nut with the M10 wrench, and then attach the wheel cover to
the wheel.
10
x1
O
x1
REMOTE
CHARGERS
CONTROL
Follow the assembly steps in the order listed below.
Attach the battery wire
connectors.
and insert the plug of the
wires into the slot of the
receiver.
connectors coming from the
gear box to the white wire
connector coming from the
battery.
Follow the assembly steps in the order listed below.
D
Attach the steering wheel.
wires on the steering wheel.
H
Attach the trailer plate.
UTV body.
11
Publicité
