Hkoenig SWR22 Manuel D'utilisation page 10

Assembly & disassembly of side brush
1. Release the screw in the
main shaft of the side
brush before changing the
side brush.
2. Press the side brush
against the main shaft and
then fasten the screw.
Cleaning of main brush and floor brush :
1. Clear the hair or big dust particles on the brush
and floor brush
cleaning performance. Clean the dus! at the air
intake. Clean the wastepaper or small particles
by dus! brush direcltly. Rotate th e brush
carefully and eut by scissors or pull by hand the
hair, yarn and other twisted abjects.
2. The cleaning of the main brush and floor brush can be
done by reference to the assembly & disassembly.
Assembly & disassembly and cleaning of Left/Right wheel
and front wheel
Assembly & disassembly and cleaning of
Left/Right wheel
1. Release the screw of the left/right wheel
by the screwdriver.
2. Take out the left/right wheel and clean
them with the brush.
Don't wash them in water
3. Place the left/right wheel in the original
position, and tighten the screw while
assembling.
Assembly & disassembly and cleaning of front wheel :
1. Pull out the front wheel with
your finger and tools and
then clean it.
2. lnsert and press the front
wheel into the right position
while assembling.
regulary to improve the