Télécharger Imprimer la page

Whirlpool AMW 6440 FB Manuel Du Propriétaire page 8

Publicité

www.elektromarkabolt.hu
CLEANING
Make sure that the appliance has cooled down before
carrying out any maintenance or cleaning.
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the glass in the door with a suitable liquid
detergent.
• At regular intervals, or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
• Activate the "Smart clean" function for an optimum
cleaning of the internal surfaces.
• The grill does not need to be cleaned as the intense
heat burns away any dirt. Use this function on a regular
basis.
TROUBLESHOOTING
Problem
The oven is not working.
The oven makes noises, even when it is
switched off.
The display shows the letter "F" followed
by a number.
Policies, standard documentation and additional product information can be found by:
Using the QR code in your appliance
Visiting our website
docs.whirlpool.eu
Alternatively,
contact our After-sales Service
sales Service, please state the codes provided on your product's identi cation plate.
8
Never use steam cleaning equipment.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage the
surfaces of the appliance.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the Crisp plate.
The Crisp plate should be cleaned using water and a
mild detergent. For stubborn dirt, rub gently with a
cloth. Always leave the Crisp plate to cool down before
cleaning.
Possible cause
Power cut.
Disconnection from the mains.
Cooling fan active.
Software fault.
(See phone number in the warranty booklet). When contacting our After-
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Open the door or hold or wait until the cooling process has
finished.
Contact you nearest Client After-sales Service Centre and
state the number following the letter "F".
400011687273

Publicité

loading