Publicité
Cleaning
Overview of cleaning
Regularly, depending on conditions of use
What?
Remove all dust from the
ventilation slits of the mo-
tor.
Clean the machine.
Storage, transportation
WARNING! Risk of injury! Store the unit in
such a way that it cannot be started by unau-
thorised persons.
NOTICE! Risk of damage to the device!
Do not stored unprotected in a damp envi-
ronment.
Storage
– Clean unit before storing.
– Store the tool in a dry and well ventilated place.
Storage of grinding tools
Note: Unfavourable ambient conditions dur-
ing storage can accelerate the ageing pro-
cess of grinding tools.
Fault/malfunction
Appliance is not running.
Insufficient performance.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
How?
Use a vacuum cleaner or
a brush.
Wipe the unit with a
slightly damp cloth
Cause
Battery not slotted in correctly?
Battery pack discharged?
Battery pack defective?
Is the device defective?
Abrading disc unsuitable for the ma-
terial?
Abrading disc worn?
– Always store abrasive bodies lying down on a
level surface.
– Only store abrasive bodies in dry and evenly tem-
pered, frost-free rooms.
– Protect abrasive bodies from direct sunlight dur-
ing storage.
Transportation
– When dispatching, try to use the original packag-
ing, if possible.
Malfunctions and troubleshooting
In the event of a malfunction...
DANGER! Attention – danger of injury!
Improperly conducted repairs may prevent
your machine from working safely. Such
repairs will endanger you and your sur-
roundings.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Slot battery into place.
► Charging the battery pack –
p. 42.
Contact your local vendor.
Fit a suitable abrading disc
► Fitting the abrading disc – p. 41.
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
Technical data
Item number
Rated voltage
• maximum
• nominal
Idling speed
Max. diameter of abrading
disc
Spindle diameter
GB
196071
20 V
18 V
-1
3000-10000 min
115 mm
M14
43
Publicité
