Publicité
GB
Table of contents
Before you begin... . . . . . . . . . . . . . . . . . . . . . . 36
For your safety . . . . . . . . . . . . . . . . . . . . . . . . . 36
Your machine at a glance . . . . . . . . . . . . . . . . 41
Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . 42
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Storage, transportation . . . . . . . . . . . . . . . . . . 43
Malfunctions and troubleshooting . . . . . . . . . 43
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Claims for defects . . . . . . . . . . . . . . . . . . . . . 138
Before you begin...
Intended use
The appliance is intended exclusively for non-profes-
sional use for dry sanding and cutting of metal and
stone materials.
The machine must be operated in accordance with
the specifications provided in these instructions.
This product is not intended for commercial use. Gen-
erally acknowledged accident prevention regulations
and enclosed safety instructions must be observed.
Only perform work described in these instructions for
use. Any other use is improper. The manufacturer will
not assume responsibility for damage resulting from
such use.
What are the meanings of the symbols used?
Danger notices and information are clearly marked
throughout these instructions for use. The following
symbols are used:
DANGER! Direct danger to life and risk of
injury! Directly dangerous situation that
may lead to death or severe injuries.
WARNING! Probable danger to life and
risk of injury! Generally dangerous situa-
tion that may lead to death or severe inju-
ries.
CAUTION! Possible risk of injury! Dan-
gerous situation that may lead to injuries.
NOTICE! Risk of damage to the device!
Situation that may lead to property damage.
Note: Information to help you reach a better
understanding of the processes involved.
These symbols identify the required personal protec-
tion equipment:
For your safety
General safety instructions
• To operate this device safely, the user must have
read and understood these instructions for use
before using the device for the first time.
36
• If you sell or pass the device on, you must also
Tran slation of the original instructions
Cordless angle grinder
hand over these operating instructions.
General power tool safety warnings
• Save all warnings and instructions for future
reference. The term "power tool" as used in the
safety instructions refers to both mains operated
(corded) power tools and battery operated (cord-
less) power tools.
Work area safety
• Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools cre-
ate sparks which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions may cause
you to lose control of the power tool.
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
• Do not misuse the connecting cable by using
it to carry the power tool, to hang it up or to
pull the plug out of the socket. Keep the con-
necting cable away from heat, oil, sharp edges
or moving parts. Damaged or entangled con-
necting cable increase the risk of electric shock.
• When operating a power tool outdoors, only
use extension cords suitable for outdoor use.
The use of an extension cord suitable for outdoor
use reduces the risk of electrical shocks.
• If operating a power tools in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
WARNING! Read all safety instructions,
instructions, illustrations and technical
data that are provided with this power
tool. Failure to follow the warnings and
instructions below may result in electric
shock, fire and/or serious injury.
Publicité
