Publicité
S W I T C H I N G O N :
Switch on the tyre inflator by pressing and releasing the 'ON' button. 0.0 appears on the digital display
0.0
Select the desired pressure measurement units by pressing and holding the 'FUNC' button for 3
seconds until the units change. (The 'Units' display appears to the right of the 0.0). Repeat the process
until the desired unit is reached (psi, bar, kpa or kg/crn2).
Release the button.
If the device remains without operation or pressure for 60 seconds, the pressure gauge switches off
automatically.
O P E R AT I O N :
Connect the compressed air hose to the tyre inflator.
Press the lever on the adapter and attach the filler neck to the valve.
Release the lever on the adapter so that the clamp on the valve can engage.
Press the inflation lever all the way down to let air into the tyre.
Release the inflation lever completely and read the pressure on the digital display.
If the pressure is higher than desired, press the inflation lever halfway down to release the pressure
until the desired pressure is reached.
Press the filler lever again to release the pressure and pull the filler neck out of the valve.
8
25100LL_manual_75030_de_en_fr_roh.indd 8
25100LL_manual_75030_de_en_fr_roh.indd 8
13.06.24 15:07
13.06.24 15:07
Publicité
