Télécharger Imprimer la page

SW-Stahl 25100L Manuel D'utilisation page 7

Publicité

S A F E T Y I N S T R U C T I O N S :
Read these operating instructions thoroughly before use and familiarise yourself with them. Keep the
instructions in a safe place so that you can refer to them in the future for safety instructions, mainte-
nance and operating procedures.
Failure to observe all warnings may result in damage to the appliance or serious personal injury.
C AU T I O N !
Do not exceed the pressure of 9 bar [130 psi] as this will cause permanent damage to the appliance.
Do not exceed the nominal inflation pressure of a tyre as this may result in a violent explosion causing
serious injury or death.
Do not use the device to inflate dry, rotten or damaged tyres, otherwise a violent explosion may occur,
resulting in serious injury or death
Keep the tyre inflator dry. Moisture can damage the precision electronics inside. Keep the tyre inflator
away from electromagnetic interference and fields.
Do not drop or knock the tyre inflator.
Do not place the tyre inflator near sources of fire or high temperatures to prevent the battery from
exploding when heated.
Wear safety goggles with side shields when operating the tyre inflator and make sure that other peo-
ple in the work area also wear safety goggles.
The SW-Stahl digital tyre inflator is designed and built to provide robust reliability and a high degree
of accuracy. The precise pressure display in 0.1 psi increments provides tight tolerances. The rubberi-
sed housing provides shockproof protection and comfortable ergonomics.
S P E C I F I C AT I O N S :
Pressure range: 0 to 130 psi [0 to 9 bar]
Graduation: 0.1 psi
Temperature range: 0°C -40°C
Air connection thread: 1/4"
Hose length: 400 mm
Measuring units: psi, bar, kpa & kg/cm2
Accuracy: +- 1%
Battery type: 2 x AAA batteries 1.5V
25100LL_manual_75030_de_en_fr_roh.indd 7
25100LL_manual_75030_de_en_fr_roh.indd 7
2 5 1 0 0 L
7
13.06.24 15:07
13.06.24 15:07

Publicité

loading