Publicité
5.2 Assist level operating
The assist level of the E-bike drive can be changed anytime, even during riding.
The assist level ranges from 0 to 3 (level 0 to level 3). The default assist level is "1" when
the display is started. The output power is zero on Level "0". Level "1" is the minimum
output power. Level "3" is the maximum output power.
Press UP/DOWN button to switch between the E-bike system assist levels and change the
motor output power.
5.3 Speed mode switch& Mileage mode switch
U represents unit settings, "1" is mile, and "2" is kilometer. The default value is "2".
To toggle the unit, press the UP/DOWN button until the desired unit is displayed.
To store a changed setting, press the ON/OFF button and access trip distance clearance
settings again or hold the ON/OFF button for 2s to exit General Settings.
10/38
Publicité
