Publicité
Fill the water tank:
Unscrew the valve cover to open the tank turning it anticlockwise
and clean water making sure not to over ll it. To close the tank, screw the valve cover
back on securely turning it clockwise. Turn the tank over and place it back into its
designated space at the back of the fan main body.
Loosen
tighten.
ATTENTION!
ake sure the product is unplugged from the mains befor
tank.
nly use water in the water tank. Do not add any chemicals, oils or other additives.
nly use cold or lukewarm water in the water tank. The water must not be warmer than
40°C.
Place the fan on a dry and stable surface and insert the plug on the socket; the unit will
emit a short "BIP" sound indicating that power is supplied. For your convenience the unit
can be operated by using control panel in the main body or by using remote control
included.
7
Indicator light:
1. Natural mode indicator
2. Sleeping mode indicator
3. Oscillation
4. Mist volume indicator: minimum-medium-
maximum
5. Timer indicator
6. Speed: low-medium-high
7. Power on indicator
Control panel
lling or re lling the water
Remote Control
Buttons:
A. On/O
B. Speed
C. Mode
D. Timer
E. Oscillation
F. Mist
4
ll the tank with cold
Publicité
