Publicité
Install 2*AAA batteries (Not included) into the remote.
When the battery is over, it must be replaced with the same type following the drawing on
the back of remote control.
ON/OFF Button (A):
ress On/O
utton one time to activate the fan. The indicator light (7) will on the
control panel. You can now press MIST (F) button to select the misting function without
fan operation (mist only).
ress On/O
utton a second time to turn on the fan: the unit will operate at low speed
and the related indicator light (4) will be on the control panel. You can now select other
functions (speed, mode, timer, mist).
ress On/O
utton when the unit is on to turn o
SPEED Button (B):
To start the fan at low speed, press On/O
will operate at low speed and the related indicator light (4) will be on the control panel.
ress speed button one time to select the medium speed: the related indicator light (4)
will be on the control panel.
ress speed button another time to select the high speed: the related indicator light (4)
will be on the control panel.
Cyclic function.
MODE Button (C):
hen you press the On/O
indicator light in the control panel that indicates this mode).
ress mode button one time to change to Natural mode: the unit simulates a natural
breeze mode and the related indicator light (1) will be on the control panel.
ress mode button another time to change to Sleeping mode: the unit simulates a soft
breeze suitable for night time use. The related indicator light (2) will illuminate on the
control panel and extinguish in 1 minute.
ress again mode button to change to Normal mode (there isn't any indicator light in
the control panel that indicate this mode).
Cyclic function.
TIMER Button (D):
hen the unit is operating, you can set the timer to switch the fan o
the set time. Press the timer button repeatedly to select the desired time period in half
hours increments: 0,5h, 1h, 1,5h ....7,5h. The related indicator light (5) will illuminate
on the control panel. When all the light (5) are o
will continuously work until you switch o
OSCILLATION Button (E):
ress the oscillation button to activate the automatic oscillation from right to left. The
related indicator light (3) will illuminate in the control panel.
ress again the oscillation button to deactivate the automatic oscillation; the indicator
light (3) will o
n the control panel.
utton (A) twice (when unit is O ): the unit
utton, the fan will operate in Normal mode (there is no
anually the unit.
5
t.
eans that time is not set and the unit
utomatically after
Publicité
