Télécharger Imprimer la page

EINHELL GE-DP 18/25 LL Li Mode D'emploi page 13

Masquer les pouces Voir aussi pour GE-DP 18/25 LL Li:

Publicité

6.1 Charging the Lithium-Ion battery (not
included)
The corresponding instructions can be found
in the original operating instructions for your
charger.
6.2 Battery capacity indicator (Fig. 6 / item
17)
Press the battery capacity indicator switch (18).
The battery capacity indicator (17) shows the
charge status of the battery using 3 LEDs.
All 3 LEDs lit:
The battery is fully charged.
2 or 1 LED(s) lit:
The battery has an adequate remaining charge.
1 LED fl ashing:
The battery is empty, recharge the battery.
All LEDs fl ashing:
The temperature of the battery is too low. Remove
the battery from the device and leave it at room
temperature for a day. If the error occurs again,
this means that the battery has been completely
depth-discharged and is defective. Remove the
battery from the device. Never use or charge a
defective battery.
7. Cleaning and maintenance
HAZARD!
Always pull out the battery pack before
starting any cleaning work.
For mobile applications, the equipment
should be cleaned with clean water after
every usage.
Use a water jet to remove any lint or fibrous
particles that may have become trapped in
the housing.
Remove sludge from the shaft bottom and
clean the shaft walls every 3 months.
7.1 Cleaning the paddle wheel
If a lot of deposits collect in the housing, the
bottom part of the equipment must be dismantled
as follows:
1. Disconnect the intake cage from the housing.
2. Clean the paddle wheel with clean water.
Important! Do not put down or rest the
equipment on the paddle wheel!
3. Assemble in reverse order.
Anl_GE_DP_18_25_LL_Li_SPK7_NA.indb 13
Anl_GE_DP_18_25_LL_Li_SPK7_NA.indb 13
EN
7.2 Maintenance
The inside of the device does not contain any
parts requiring maintenance.
8. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 50°F and 104°F (10°C
and 40°C). Keep the electric tool in its original
packaging.
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of Einhell
Germany AG.
Subject to technical changes.
- 13 -
14.06.2024 10:25:11
14.06.2024 10:25:11

Publicité

loading

Ce manuel est également adapté pour:

4181595