Publicité
d. The charger will charge the battery automatically.
e. When the battery is fully charged, remove the battery pack from
the charger.
Please refer to the charger manual for detailed charging operation.
NOTE: If the battery pack cannot accept a charge, the contacts of
the charger or battery pack may be contaminated. Clean the contacts
of the charger or battery pack (e. g. by inserting and removing the
battery several times or scrubbing with a cotton swab and alcohol),
replace a new charger or replace the battery pack, as required.
Charging via USB-C Port
WARNING
battery with certified USB-C
chargers . Failure to obey this
warning could cause battery damage
and serious personal injury.
NOTICE
chargers supporting USB-PD.
Please note that other charging protocols may be not compatible
with the battery.
a. Open the rubber USB-C port cover.
b. Use a suitable USB-C cable (included in starter kits) and insert it
into the USB-C port (Fig. 3).
c. Connect the USB-C cable to a USB-C power adapter (included in
starter kits).
d. The battery pack will start charging automatically. The fuel gauge
lights will be fading in and out to signal the active charging
process.
e. When the battery is fully charged, disconnect the USB-C cable,
and close the USB-C port cover to protect the port from moisture
and contamination.
Always
charge the
The battery can be
charged via
Fig . 3
USB-C Port Cover
USB-C Port
15
Publicité
