Hooking Up The Gas - Plancha Tonio FERIA Notice D'utilisation Et D'entretien

Note : For the UK market, your plancha griddle is delivered with a Kit Quick-on REG
and hose L=900 (UK) Propane 37mbar
Please note that you can only use Butane (G30) or Propane (G31) gas.
A factory-installed elbow fitting connects the flexible gas hose to the gas intake (the user
must never remove it ).
Tie, with the clamp, one end of your flexible hose to the Plancha griddle and hook the end
with the regulator to the gas bottle.
Use a 6 to 13 kg gas bottle. The gas bottle must not exceed 560 mm in height and 310 mm
in width with safety pressure reducer.
Avoid unnecessary twisting and bending. The tube must not be any longer than 900 mm. It
must be entirely visible (from the appliance to the bottle) and easily accessible.
Frequently check its condition and the expiry date (recommended : within 5 years of
manufacturing date on hose). Replace at the first signs of deterioration.
Check for gas leak once in place.
Note :
The soft tube or flexible must always be placed at the rear-right side of the plancha
griddle. Pipe or flexible must never be in contact with hot parts of the plancha griddle
and must never endure exagered torsions. The hose must be visible on its all length
(from Plancha griddle to gas bottle) and easily accessible.
The safety reducer must always be positioned on the same side as the gas intake.
Connect it to the elbow connection directly plugged on gas outlet. Taking it off is
prohibited at all time.

Hooking up the gas

GB
20