Publicité
5. Slide posts through underside of shelf until shelf
slides firmly over supports. (See Figure 4)
Figure 4
6. Stand unit upright. Gently tap shelf down to secure it.
(See Figure 5)
Figure 5
7.
Determine the height of the next shelf, snap on
supports then add and secure shelf. Repeat this
step to add the remaining shelves. (See Figure 6)
Figure 6
PAGE 2 OF 9
ASSEMBLY CONTINUED
SLIDING TRACK
1. Attach stops to the ends of the tracks using two bolts.
(See Figure 7)
2. Place end track in desired location and connect
track segments. (See Figure 8)
3. Insert pins into roller assemblies. (See Figure 9)
Figure 7
Figure 8
Figure 9
1224 IH-2901
Publicité
