Publicité
Figure 5
A
Figure 6
B
Figure 7
C
Removal / Transfer
1. Turn off suction. Disconnect tubes from FILTRON lid, maintaining sterility.
2. Remove one white cap that is attached to side of FILTRON
3. Attach the Transfer Tube to PATIENT port. B - See Figure 6.
Close the white pinch clamp on the Transfer Tube. All ports are now closed.
4. Carefully invert the FILTRON upside down.
5. Attach Luer Lock syringe to Transfer Tube. Open pinch clamp and draw out fat to be re-injected.
C - See Figure 7.
Repeat with additional syringes. If some tissue is left in the unit, remove lid to extract.
6. When desired volume has been transferred, discard entire system.
7. Attach re-injection cannula. Fat is ready to be re-injected to recipient site.
Dispose in standard medical biohazard waste receptacle.
Do Not Re-sterilize or Re-use.
Device remains upright.
lid. Use to close VAC Port. A - See Figure 5.
\
45885 | RevC | OCT2021
Publicité
