Publicité
Make sure that the body is stabilized on a suitable stand before using the vice.
• Determine the leverage required for the work.
• Adjust the two screws to regulate the inclination and rotation of the vice.
This screw can be loosened to
change the
Turning vice
• Turn the handle counterclockwise to open the jaws.
• Place the workpiece in the clamping jaws.
• Turn the handle clockwise to close the jaws so that the workpiece fits correctly in the
vice.
Risk of crushing the hand under the vice.
12
Commissioning
Handle can be turned to open/close
the jaws
Figure 3
This screw can be loosened to tilt
the vice
V. 1.1
EN
Publicité
