Publicité
GALEOBT, GALEOBT BLACK
Backlit Bluetooth keypad and remote electronics
8] MY DIGICODE APP
With the My Digicode app you can fully configure and manage
your keypad from your smartphone. This app is available from
Android 5 and IOS 8.1. Search My Digicode in your app library.
Note: for the app to work properly, 'Location Sharing' must be
enabled on your smartphone.
Basic configuration in a few steps:
1. Press "Add code" and select the BOXCODE you
want to configure. The box with the lowest RSSI value
is the closest BOXCODE.
2. Select the BOXCODE you want to configure and
press "OK". Enter the name of your BOXCODE.
Enter a master code you wish to use for programming.
The codes 12345 and 00000 are not permitted. Also
choose the length of the user code you want to use (4 or
5 digits). Press "next" at the bottom of the screen.
3. Here you can enter a code for each door or select a
randomly generated code. Press "Next". Then enter the
address of your BOXCODE and press "Finish".
10
EN
EN
Backlit Bluetooth keypad and remote electronics
Here you will see all the data that you have configured.
As an installer, you can forward these configurations to
the end customer by pressing ''Send''.
4. Selecting the cog in the bottom left opens the
menu of your GALEOBT. Menu parameters: change
box name, change address, sound, (master)
codes, change relay switching times, ...
5. Press "Share" at the bottom, choose "permanent"
or "temporary" and then select which of the doors
you want to share access to. Click "Confirm" and
"Send now".
6. The recipient can then open the file from the e-mail
with "My Digicode". The name of the box appears in
"My contacts". Select the box and the door icon will
appear.
When the recipient selects this access, they see a door
and when you are in front of the door you can open it
by pressing the door icon. This door icon will turn green
when the door is opened.
GALEOBT, GALEOBT BLACK
11
11
Publicité
