A
GETTING STARTED
●
The device is intended for use only in a temperate climate.
●
If smoke, an unusual odour or strange noise is emitted by the device: unplug the
mains cable from the electrical outlet and consult the after-sales service or repair
centre. Never attempt to make repairs yourself, this could be potentially dangerous.
●
Do not attempt to open or disassemble the device. This would expose you to
dangerous voltages.
●
The slots and openings of the device are intended for ventilation and to ensure its
operation. To prevent overheating, these openings must not be obstructed or covered
in any way, such as by newspapers, tablecloths or curtains.
●
Always leave a minimum distance of 10 cm around the device for sufficient ventilation.
●
Never push any object into the device through one of its openings, as it may come into
contact with electrical components, which can cause an electric shock or fire.
●
In case of thunderstorm or lightning, immediately unplug the mains cable from the wall
outlet.
●
Always turn off the device when not in use. Unplug the mains cable from the electrical
outlet when the device will not be used for a long period of time.
●
Unplug the device from the electrical outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a dry, soft cloth for cleaning.
●
If the product does not bear the
connected to a mains socket with a protective earth connection.
CAUTION –: TO AVOID RISK OF INJURY OR DAMAGE TO THE PRODUCT OR
OTHER EQUIPMENT:
●
This product is intended for household and personal use only. Do not use this product
for commercial, industrial or other purposes.
●
Do not subject the product to strong shocks, extreme temperatures or direct sunlight
for prolonged periods.
●
Keep the product away from magnetic objects, motors and transformers.
●
Do not use the product outdoors, regardless of weather conditions.
●
Install the device only on a stand (furniture, wall...) that can support its weight safely.
(Danger of instability : The TV may fall and cause serious bodily injury or death)
logo, it is a Class I device. It must then be
4
ENG